How to identify beeswax? How to identify the true and false of beeswax?

Wax is a waxy substance produced by worker bees of the honeybee insects. A variety of amber is opaque or semi-opaque. The beeswax symbolizes the eternal lover and constantly exudes inexplicable charm. I wish to write thousands of praise poems for it every day to express its eager pursuit of love, and to wholeheartedly cherish it, no matter which time and space it is in. In the middle, the name of the beeswax is as pure, beautiful and perfect as itself. And when you want to start beeswax, you should learn how to identify beeswax? How to identify the true and false of beeswax?

The best test method: eye, ultraviolet radiation, hand, salt water, other methods more or less even if amber is detected will cause certain damage to amber, the above identification method can not be used alone, should use a variety of test methods Separation of layers, de-authentication!

蜜蜡

How to identify the true and false of beeswax?

But the most reliable method of identification is to go to the geological department for testing! There is no such thing as "cannot be tested" - even if the so-called "Middle East beeswax" that China has seen in recent years is not hot enough to attract the attention of the testing department, it can at least tell the buyer the actual composition of the Middle East beeswax.

Steps/methods for identifying beeswax:

1. The beeswax containing more succinic acid is darker than the wax containing less succinic acid; the beeswax with heavier acidity in the stratum is darker.

2. If the original wax is buried in the “blue soil layer” for a long time (the layer is Oligocene, the sand is loose, containing mica and calcareous), it will gradually become blue by the influence of lime and titanium oxide in the sand.

3. The so-called "blue soil layer" is not blue, but the components of lime (including carbonic acid) and titanium oxide contained in it can turn the original wax into blue.

4. Sulfur and sulfide invade the beeswax to make it green, even blue-violet, and the penetration of copper sulfate will turn it into green.

5. Intrusion into iron ore, cinnabar or manganese to make it red, brown, brown and brown.

6. Those who have been exposed to geothermal heat for a long time have darker colors; those who have long buried snow are mostly affected by geothermal heat, mostly earthy, brown, brown, red and beige.

7. In the strata with more humus soil, the beeswax is more infiltrated into brown, even black and dark green; hidden in coal seams and ash, it is black and gray.

蜜蜡

How to identify the true and false of beeswax?

8. Those who have been floating in the water for a long time (such as Haipo and Huber) will have a lighter color; the adjacent volcano will also change color and have more fluorescence.

9, salt test method: amber density between 1.05-1.10 in 1:4 (salt: water) of saturated brine, amber, lightweight plastics and resins can float, ordinary plastic, glass, acrylic and electricity The wood sinks.

10, heat test: the needle is burnt red thorn amber is not obvious, there is a light pine flavor. Bakelite and plastic give off a spicy odor and stick to the needle.

11. Needle-cutting test: The cutting knife will cut into a powder, the resin will fall off in pieces, the plastic will be rolled, and the glass will not be cut. Using a hard needle and a horizontal line to puncture amber at a 20-30 degree angle will have a bursting sensation and very fine powder residue. If it is a plastic or other substance with different hardness, it will either stick or be sticky. Get in.

12, the nail polish syrup: wipe the spot with a cotton swab repeatedly rubbing the amber surface, no significant changes. There is no change in the plastic and the pressure and the amber, but the resin and the coba are corroded to form a sticky pit because there is no petrochemical. The rosin is put into the syrup and it will melt slowly. (Friendly reminder: Some amber has a layer of glazing material, it will become white spots under the rubbing of the potion, but this layer of white spots can be scraped off with a nail shell to expose the amber surface, and the potion is wiped on it without any change. There will still be 18%-20% melting of amber, and the surface may become foggy for a long time.)

13, feel: amber is a neutral organic gemstone, summer wear will not be very hot, winter wear will not be too cold, very gentle. With glass or chalcedony, there will be a deep feeling of ice and ice.

14, eye scales: This is the most important method of inlaid amber identification. There are generally beautiful lotus leaf scales in the popcorn amber. It has different feelings from different angles, and the refractive power will not be the same, emitting a spiritual light. The transparency of fake amber is generally not high, and the scales emit dead light. The observation from different angles is almost the same, lacking the aura of amber. The scales and patterns of fake amber are mostly injected, so most of them are the same. The most common one in the market is red scales.

15. Eye-view bubbles: The bubbles in amber are mostly round, and the bubbles in pressed amber are mostly long and flat.

蜜蜡

How to identify the true and false of beeswax?

16, ultraviolet radiation: put amber under the money detector, it will have fluorescence, light green, green, blue, white and so on. Amber and Jinpo are the most obvious discoloration. The discoloration of blood and beeswax is not obvious. The more transparent, the more obvious the plastic will not change color.

18, aroma: amber when rubbing only a little smell can not smell very light or simply can not smell, but the amber with the skin will produce aroma when rubbing, as well as the smell of shampoo will produce aroma. Amber will only emit a loose scent when burned.

19. Sound test: Amber beads without inlays are gently swayed in the hands, which will give a very soft and slightly dull sound, if the sound of plastic or resin is crisper.

20, friction with static: take amber rubbing on the clothes can attract small pieces of paper.

21. Identification: Get the CMA Jewelry Appraisal Center to measure the refractive index and density.

Women's Casual Shoes

Ladies Casual Shoes,Black Shoes Womens Casual,Casual Tennis Shoes Womens,Womens Casual Slip On Shoes

Huaying Shoes Co. Ltd , https://www.qzhuayingshoes.com