New buying life concerns: measured sample PH value of a sample is not up to standard PH value is an important indicator to check whether children's clothing is qualified. The experts conducted this experiment in a thermostatic laboratory: After sampling three children's clothing, they were placed in a 0.1 mol/L potassium chloride solution. Then, the sample container containing the sample is placed on the electric instrument and shaken left and right. The shaking duration is 2 hours. Two hours later, take out the container. The pH value of the solution in the container was measured with a pH meter. After the detector probe reaches the solution, the pH of the solution is quickly displayed on the detector's display. Among them, the pH of sample A is not up to the standard. The safety technology category marked on the label of Sample A is Class A, and the range of PH value shall be specified in 4-7.5. The test results showed that the pH value of sample A tops was 8.5 and that of trousers was 7.8, both of which were alkaline and exceeded the standard requirements. Concern for life: Newly-acquired children's clothing is washed and then given to children The human skin is weakly acidic, and the PH value is more than 7 is alkaline. If the alkaline clothes directly touch the skin, it will easily harm the skin surface of the beneficial bacteria, the child's delicate skin is more likely to cause injury. Therefore, the newly purchased children's clothing should be washed once before the child wears it, and the residue of the fabric during the dyeing process is further removed. Peng Shixiong said that dark-colored T-shirts should be soaked in salt water for the first time for 1-2 hours. The printed T-shirts are best to be washed over. Life concerns: How to clean children's clothing? First, small suits, large clothes and other clothing Children's wear and coats are mostly made of high-grade fabrics, of which some are pure wool fabrics. After wearing these fabrics for a period of time, some parts will be deformed due to excessive tension, as long as they are properly ventilated and hanged. You can restore the original. Second, often dust the clothes Frequent dust removal from children's clothing is a necessary part of maintaining children's clothing. Dust can cause children's clothing to lose its fresh color. Therefore, the dust on children's clothing must be removed with a brush. If it is covered with hair or other fibers, it can be removed with tape. Third, high-end children's clothing Children's wear wholesalers are reminded of the high-end children's wear, especially the pockets of the jackets, which are generally decorative. There should not be too many or too heavy sundries inside. The children's clothing will be deformed and the wearing effect will be affected if the sundries are frequently used. The pockets of newly bought clothes are sealed with seals. Try not to fold the seals as far as possible. This is more conducive to keeping children's clothing models. Fourth, wear longer children's clothing Longer-wearing children's clothing can easily produce light at the elbows, buttocks and knees. To remove this light, you can dribble a little vinegar in the water. After the towel is wet, wipe the light with a towel in one direction to remove the light. When ironing clothes, a layer of cloth should be put on the clothes, preferably a pure cotton texture, to prevent the children's clothing from being discolored or bright. Fifth, choose a special detergent for children's clothing clothes, but the price is more expensive, but the baby's body protection, does not harm the skin, causing allergies. Another is to use the amount of washing instructions must be washed according to the product label, such as: dilution ratio, soaking time, the number of water and so on. Washing Tips: 1, wash with cold or warm water, do not strong twist; 2, easy to dry after washing, not exposure, so as not to wrinkle due to heat; 3, ironing should be added wet cloth, the temperature can not be too high, dark clothing best hot side. Source: China Children's Wear Industry Network phone QQ
Enamel pin badge widely used for the following industry as a great customized, fashion & high quality accessory. And Garment industry,Such as Overcoat, jacket, suit, leisure suit, t-shirt, shirt, skirt, work-clothes, sports wear, jeans wear, trousers, pants, foot wear and so on. Bag industry,Handbag, dust bag, school bag, purse, backpack, luggage and so on. It is can be finished with logo embossed, engraved, printed, laser, Available with various different metal colors,Plated color: options of gold, silver, bronze, nickel, chrome, antique plating etc..... Material:options of brass, iron, zinc alloy, ect......
process: Stamping, Die-cast, Anti-gold, Pearlized, gold, Nickel, Anti-nickel, Pearlized, Silver, Anti-silver.Material is friendly, Non-toxic and safe, Quality control 100% inspection before packing. Spot inspection before shipment.
Enamel Pin Badge,Lapel Pin Badge,Custom Enamel Badges,Soft Enamel Pin Badge Shenzhen MingFengXing Art & Craft Products CO., LTD. , https://www.metallapelpin.com